volkswagen Workshop Repair Guides

Volkswagen Passat Wagon 19L Turbo Repair Manuals | Workshop Service

Throttle Position Sensor > < Diagram Information and Instructions|Page 2126
Page 2
background image

Scale B the values for temperature range 50 to 100°C.

Examples:
30°C corresponds to a resistance from 1500 to 2000 Ohms
80°C corresponds to a resistance from 275 to 375 Ohms

If the specification is not obtained:
-

Replace injection pump

-

Display the readiness code

If DTC memory was erased:
-

Create readiness code again

If specification obtained:

-

Connect Test Box VAG 1598/18 to ECM harness connector

-

Check wiring for open circuit between Test Box and connector -1- using wiring diagram:
terminal 7 + socket 63
terminal 4 + socket 33
Wire resistance: 1.5 Ohms maximum.

Also check wires for shorting to one another
Specification: Infinite Ohms.

If wiring OK:
-

Replace Diesel direct injection system ECM J248

-

Display the readiness code

If DTC memory was erased:
-

Create readiness code again

Throttle Position Sensor > < Diagram Information and Instructions|Page 2126