Passat Wagon L4-1.9L DSL Turbo (AHU) (1997)
Seat Belt Tensioner: Service and Repair
Refer to image and legend below for disassembly and assembly information.
1 - Mounting bracket
2 - Hex nut
-
23 Nm (17 ft lb)
3 - Hex bolt
-
Torque to: 23 Nm (17 ft lb)
-
Mounting bolt for shock absorber
4 - Hex bolt
-
Torque to: 40 Nm (30 ft lb)
5 - Belt retractor
Removing on Sedan:
-
Remove belt guide and belt cover first.
-
Remove bolt, working from boot.
Removing on Wagon:
-
First remove belt guide, belt cover and trim for luggage area, remove front luggage area trim in rear area and pull off from wheel housing.
Installing: Install belt retractor with pins in mounting bracket.