Passat Wagon L4-1.9L DSL Turbo (AHU) (1997)
Relay Box: Service and Repair
Fuse/Relay Panel, Removing and Installing
CAUTION: See: Service Precautions
NOTE: The fuse/relay panel is located under the left side of the instrument panel.
Removal and Installation
-
Remove lower instrument panel trim.
-
Spread retaining clips -1- and disengage lock pins -2- from brackets -4-.
-
Swing retaining clips -1- forward and pull from fuse/relay panel pins -3-.
-
Spread left retaining bracket -4- and disengage from pin -5-.
-
Lift fuse/relay panel from brackets -4-.
-
Remove multi-point connectors from back of fuse/relay panel and remove fuse/relay panel.
-
Install in reverse order of removal. Make sure pin -5- and retaining pins -2- engage recesses in brackets -4-.