Passat Wagon L4-1.9L DSL Turbo (AHU) (1997)
-
Loosening and tightening, refer to Fig. 1
22
Stop
23
Suspension Strut Bearing
24
Suspension Strut
-
Removing and installing, refer to Fig. 1 and Fig. 2
-
Disassembling and assembling. See:
25
Bracket
26
Hex Bolt
27
Tie Rod
-
Removing and installing. See: Steering/Tie Rod/Service and Repair
28
Countersunk Screw
29
Screw
NOTE: For this procedure, use the tools shown in the following illustrations or their equivalents.
Fig. 1 - Suspension Strut To Body, Loosening And Tightening
Fig. 2 - Wheel Bearing Housing/suspension Strut Joint, Separating
NOTE: Camber must be adjusted each time joint is loosened.
Fig. 3 - Ball Joint/Control Arm Connection, Separating
-
To take drive shaft out, remove bolts (arrows).