Passat Wagon L4-1.9L DSL Turbo (AHU) (1997)
Wheel Bearing: Diagrams
1
Self-Locking Nut
-
Tighten to: 265 Nm (195 ft. lbs.)
-
Only loosen and tighten with the vehicle standing on its wheels (danger of accident)
-
Any paint residue and/or corrosion on the thread of the outer joint must be removed before the nut is installed
2
Washer
3
Brake Disc
-
Allocation, refer to Brakes and Traction Control.
4
Brake Caliper
-
Do not loosen brake hose when working on front suspension
-
Hang up with wire or similar
5
Hub
6
Speed Sensor Rotor
-
Only on vehicles with ABS
7
Hex Bolt
-
Tighten to: 10 Nm (82 inch lbs.)
8
Splash Plate
9
Circlip
-
Ensure correctly seated
10
Wheel Bearing
-
Replace, as it is destroyed during pressing out
11
Self-Locking Hex Nut
-
Tighten to: 35 Nm (26 ft. lbs.)
12
Wheel Bearing Housing
13
Self-Locking Hex Nut
-
Tighten to: 50 Nm (37 ft. lbs.)
14
Hex Bolt
-
Clamping bolt for ball joint
15
Self-Locking Bolt/Washer Assembly