Passat Wagon L4-1.9L DSL Turbo (AHU) (1997)
Fig. 1 Centering clutch disc and removing and installing pressure plate
-
Loosen and tighten bolts in stages, evenly and diagonally.
-
When removing, reverse position of flywheel retainer 3067.
CAUTION:
^
Pressure plate contact surface and clutch disc must make full contact with flywheel.
^
Tighten mounting bolts evenly in a diagonal pattern to prevent damage to the centering holes in the pressure plate housing and the centering
pins in the flywheel.
Fig. 2 Checking diaphragm spring
-
Check ends of diaphragm spring -arrows- for wear.
-
Maximum wear: up to half of original diaphragm spring thickness