Passat Wagon L4-1.9L DSL Turbo (AHU) (1997)
-
Pressing in, refer to Fig. 7
11
Self-Locking Hex Nut
-
Tighten to: 35 Nm (26 ft. lbs.)
12
Wheel Bearing Housing
13
Self-Locking Hex Nut
-
Tighten to: 50 Nm (37 ft. lbs.)
14
Hex Bolt
-
Clamping bolt for ball joint
15
Self-Locking Bolt/Washer Assembly
-
Tighten to: 125 Nm (92 ft. lbs.)
-
For securing brake carrier
16
Socket Head Multi-Point Bolt
-
Tighten to: 45 Nm (33 ft. lbs.)
17
Drive Shaft
-
To remove and install separate ball joint/control arm connection, refer to Fig. 2
-
Repairing, refer to Servicing
18
Circlip
-
Ensure correctly seated
19
Self-Locking Hex Nut
-
Tighten to: 95 Nm (70 ft. lbs.)
20
Hex Bolt
-
Shank diameter 11 mm
-
Adjusting camber, refer to Steering and Suspension
-
Mark position before loosening
21
Self-Locking Hex Nut
-
Tighten to: 60 Nm (44 ft. lbs.)
-
Loosening and tightening, refer to Fig. 1
22
Stop
23
Suspension Strut Bearing
24
Suspension Strut
-
Removing and installing, refer to Fig. 1 and Fig. 2
-
Disassembling and assembling, refer to Steering and Suspension
25
Bracket
26
Hex Bolt
27
Tie Rod
-
Removing and installing, refer to Steering and Suspension
28
Countersunk Screw
29
Screw
NOTE: For this procedure, use the tools shown in the following illustrations or their equivalents.