Passat Wagon L4-1.9L DSL Turbo (AHU) (1997)
/Page-985003.png)
Fig. 1 - Suspension Strut To Body, Loosening And Tightening
Fig. 2 - Wheel Bearing Housing/suspension Strut Joint, Separating
NOTE: Camber must be adjusted each time joint is loosened.
Fig. 3 - Ball Joint/Control Arm Connection, Separating
-
To take drive shaft out, remove bolts (arrows).
NOTE: First mark installation position.
Fig. 4 - Hub, Pressing Out Of Wheel Bearing Housing
