Passat Wagon L4-1.9L DSL Turbo (AHU) (1997)
Removing Sleeve for Oil Seal
-
Pry out with a screwdriver
Installing Sleeve for Oil Seal
-
A = Threaded rod from seal installer 3066
-
B = M12 nut with washer
-
Screw threaded rod (A) into differential threaded piece
-
Pull sleeve in onto stop with thrust piece 3124 by turning nut (B)
NOTE: When transmission is disassembled, press sleeve in with thrust piece 3124 onto stop.
23
-
Oil seal