Passat Wagon L4-1.9L DSL Turbo (AHU) (1997)
-
Remove self locking nut -7- and back-up light switch cam sleeve -6-.
Note:
At this point verify that selector shaft is still binding by moving shift lever -12- up and down.
If selector shaft moves freely (does not bind);
-
Check cables and linkage for damage.
If selector shaft still binds:
-
Remove gear shift lever -12-.
-
Replace selector shaft housing -4-.
Selector shaft housing, replacing
-
Remove selector shaft housing attachment bolts -arrows- (tap housing lightly with brass or plastic mallet to loosen).
-
Remove selector shaft and housing from transmission.
To remove selector shaft from housing:
-
Invert housing and work shaft up and down until shaft comes free of housing.