Passat Wagon L4-1781cc 1.8L DOHC Turbo (ATW) (2000)
/Page-536005.png)
-
Remove retainer for chain tensioner 3366.
-
Coat hatched area of double bearing cap lightly with sealant D 454 300 A2, install and tighten to 10 Nm (remember dowel sleeves).
-
Install remaining bearing caps and tighten to 10 Nm (remember dowel sleeves).
-
Check position of camshafts to one another.
Note:
The remaining assembly is basically a reverse of the disassembly sequence.
Installing toothed belt and adjusting timing, Refer to Timing Components - Timing Belt See: Timing Components/Timing Belt
CAUTION: Wait about 30 minutes after installing the camshafts before starting the engine. The hydraulic valve compensating elements must
settle, otherwise the valves may strike the pistons.
