Passat Wagon L4-1781cc 1.8L DOHC Turbo (ATW) (2000)
Ribbed Belt: Removal and Replacement
Ribbed Belt For A/C Compressor
Ribbed belt for A/C compressor, removing and installing
Special tools and equipment
-
Torque wrench VAG 1331 (5 to 50 Nm)
Note:
Before removing the ribbed belt mark the direction of rotation. When installing the belt ensure it is correctly seated in the pulley.
Removing
-
Remove ribbed belt. See: Ribbed Belt, Removing and Installing
-
Loosen A/C compressor ribbed belt tensioner securing bolts and take off ribbed belt.
Installing
-
Install ribbed belt for A/C compressor.
-
Use torque wrench and tension V-belt tensioner to 25 Nm.
-
Tighten bolts -A- to 20 Nm.
-
Install ribbed belt. See: Ribbed Belt, Removing and Installing
Ribbed Belt For Air Conditioning Compressor, Removing and Installing