Passat Wagon L4-1781cc 18L DOHC Turbo (ATW) (2000) - Engine Lubrication - Low Oil Pressure
^
Remove cylinder head cover.
^
Install plastic oil deflectors on top of intake camshaft.
^
Install cylinder head cover following ELSA WEB repair manual procedures. Cover will NOT be removed again.
^
Install a new engine oil filter again and fill the engine with fresh oil.
^
Restore engine and vehicle to full driving conditions.
Note:
Always use engine oil that conforms to Volkswagen Oil Quality Standard VW 502 00.
Engine Replacement Guidelines:
If at least ONE camshaft bearing is damaged, proceed with the following:
^
Replace complete engine using factory remanufactured parts in accordance to warranty policy.
Note:
Before installing a previously used toothed belt camshaft sprocket on a new engine, visually inspect for fractures and damage especially in the
indexing key area. If fractures or damage is found, replace the sprocket.
^
Replace turbocharger.
^
Replace oil feed and oil return lines of turbocharger.
^
Replace crankcase ventilation system hoses, pressure regulating valve and brake booster suction jet pump as described in "Engine Repair Guidelines"
section.
^
Replace oil filter holder.
^
Replace engine oil cooler.
^
Install new engine oil filter, fill engine with fresh oil and restore the engine and vehicle to full driving conditions.
Note:
Always use engine oil that conforms to Volkswagen Oil Quality Standard VW 502 00.