Passat Wagon L4-1781cc 1.8L DOHC Turbo (ATW) (2000)
-
Loosen rear right transmission mounting rear bolt -2- several turns, remove right transmission mounting front bolt -1-.
-
Loosen nut for left-hand transmission mounting (arrow) until it aligns with lower edge of bolt (turned approx. 4 threads).
-
Lower subframe slowly with workshop crane.
-
Remove workshop crane, swing stabilizer bar down.
-
Remove oil pan, it may be necessary to release sump by tapping lightly with a rubber head hammer.
Note:
It may be necessary to release the oil pan by tapping it lightly with a rubber mallet.
Vehicles without solid gasket