Passat Wagon L4-1781cc 1.8L DOHC Turbo (ATW) (2000)
-
Remove spark plugs with spark plug wrench 3122B.
-
Set piston of appropriate cylinder to "Bottom Dead Center".
-
Screw pressure hose VW 653/3 into spark plug thread.
-
Mount installation tool 3362 on cylinder head with securing bolts.
-
Position installation tool for compressing valve springs to one of the following positions:
Outer intake valves: lower position
Center intake valve: upper position
Exhaust valve: lower position
-
Connect pressure hose to compressed air system supplying at least 6 bar and remove valve springs.
-
Pull off valve stem seals with 3364.
Installing