Passat Wagon L4-1781cc 1.8L DOHC Turbo (ATW) (2000)
/Page-666001.png)
Timing Cover: Service and Repair
Sealing flanges and flywheel/drive plate, removing and installing
1. Oil seal
^
To remove oil seal, remove sealing flange
^
Install with 10203
^
Lightly oil sealing lip
2. Woodruff key
^
Ensure tight fit
3. 25 Nm
4. Sealing flange
5. Gasket
^
Always replace
6. Cylinder block
^
* Removing and installing crankshaft
^
Disassembling and assembling pistons and conrods
7. 60 Nm + 1/4 turn (90°) further
^
Always replace
8. Dual-mass flywheel/drive plate
^
Lock with 3067 to remove and install flywheel
^
Removing and installing drive plate
9.
Intermediate plate
^
Must be located on dowel sleeves
^
Do not damage/bend when assembling
10. 10 Nm
11. Sealing flange with oil seal
