Passat Wagon L4-1781cc 1.8L DOHC Turbo (ATW) (2000)
Clutch: Service and Repair
3RD and 4TH Gear Clutch -K3- With Turbine Shaft
3rd and 4th gear clutch -K3- with turbine shaft, disassembling and assembling
Only when cleaning or carrying out visual inspection must clutch be disassembled.
1. Circlip
^
Different thickness
^
Mark when removing and install at same point
2. Thrust plate
^
Install with stepped side facing Circlip
3. Inner plate
^
Quantity See: Specifications
4. Outer plate
^
Quantity See: Specifications
5. Pressure plate
-
Install with peened corrugated washer facing piston
6. Corrugated washer
^
Peened to pressure plate (item 5)
7. Securing ring
^
Removing and installing; see Fig. 1
8. Piston cap
^
Sealing lips are vulcanized to piston cap
-
Moisten with ATF before installing
-
Turn piston cap slightly when installing
^
When removing and installing press down and fit securing ring (item 7)
9. Spring
-
Seat between piston and piston cap
10. Piston
^
Sealing lips are vulcanized to piston
-
Moisten with ATF before installing
-
Turn piston slightly when installing
11. Clutch housing with turbine shaft
^
Height varies according to number of inner and outer plates
12. O-ring
-
Always replace