Passat Wagon L4-1781cc 1.8L DOHC Turbo (ATW) (2000)
Clutch: Service and Repair
1ST to 3RD Gear Clutch
1st to 3rd gear clutch -K1-, disassembling and assembling
Only when cleaning or during visual inspection is the clutch disassembled.
1. Support ring
^
4-piece, unclip from inner plate carrier
^
Installing; see Fig. 2
2. Inner plate carrier
^
Installing; see Fig. 4
^
Assembling; see Fig. 2
3. Circlip
^
Different thickness
^
Mark after removing and insert in same position
4. Thrust plate
^
Smooth side faces inner plate
^
Insert together with inner plate carrier; see Fig. 2
5. Inner plate
^
Quantity See: Specifications
^
Installing; see Fig. 2
6. Outer plate
^
Quantity See: Specifications
^
Installing; see Fig. 2
^
Always 1.5 mm thick
7. Outer plate
^
Always 2 mm thick
^
Installing; see Fig. 2
8. Corrugated washer
9. Circlip
^
Removing and installing; see Fig. 1
10. Piston cap
^
Moisten sealing lips with ATF before installing
^
Turn cap slightly when installing
11. Intermediate spring ring