Passat Wagon L4-2.0L (ABA) (1995)
Sunroof / Moonroof Panel: Adjustments
Sliding/tilting roof with glass panel
Parallel alignment, adjusting
Sliding/tilting roof glass panel closed.
-
Disconnect battery ground strap.
-
Fully push back sliding headlining and trim frame.
-
Remove cover from cable drive.
-
Remove cable drive assembly.
Notes:
-
The drive pinion must no longer be in mesh with the cables.
-
Always use new screws (coated) when installing the cable drive. Tightening torque: 3 Nm (26 ft lb)
-
Slide rear guides from front to rear only to marks (notches) -arrows-.
-
Pin -3- must be within markings (notches) -arrows-.
-
Locating hooks -4- must be engaged in guide rails