Passat Wagon L4-2.0L (ABA) (1995)
Brake Caliper: Service and Repair
Overhaul
Front
Exploded View Of Lucas/Girling Front Caliper
Component Notes And Information
NOTE:
^
Suring service procedures, refer to the illustration above and the information below.
^
When repairing, apply a thin coat of brake fluid to cylinders, pistons and seals. Install all parts in repair kit
^
During removal and installation procedures, refer to the component location illustration above and component notes below
1
Protective cap
2
Bleeder valve
-
Before tightening lubricate threads lightly with brake fluid
3
Brake caliper housing
4
Self-locking hex bolt
-
Tighten to: 35 Nm (26 ft lb)
-
Always replace
-
Counterhold guide bolts when loosening/tightening
5
Seal
-
Remove using a suitable blunt tool
6
Piston
-
Coat lightly with brake fluid or brake cylinder paste before installing
7
Protective seal
-
Do not damage when inserting piston
8
Brake carrier with guide pins and protective caps
-
Supplied as replacement part with pre-lubricated guide bolts and protective caps.
-
If protective caps or guide bolts are damaged, install repair kit and lubricate guide bolts with grease pack supplied.
Removal