Passat Wagon L4-2.0L (ABA) (1995)
Parking Brake Lever: Service and Repair
Exploded View Of Parking Brake Lever Assembly
Component Notes And Information
NOTE: During removal and installation procedures, refer to the component location illustration above and component notes below
1. Parking brake lever
-
Different version for rear drum and rear disc brakes
2. Hand grip
-
Pull down locating tab under hand-grip and pull forward to remove
3. Adjusting nut
4. Lock nut
5. Compensator
6. Parking brake lever trim
-
First pull off hand grip (2), then pull trim forward
7. Hex nut
8. Parking brake cable
-
Different versions for rear drum and rear disc brakes
Procedures
Fig. 1 Parking Brake Cable Installation Position
-
The parking brake cable is secured by clamps to the axle beam in the center of the two colored marks