Passat Wagon L4-2.0L (ABA) (1995)
^
Tightening torque: 20 Nm (15 ft lb)
-
Install bearing caps 1, 3 and 5.
^
Tightening torque: 20 Nm (15 ft lb)
-
Insert Woodruff key in camshaft.
-
Install camshaft drive belt sprocket.
^
Use holding tool 3036
^
Tightening torque: 80 Nm (59 ft lb)
-
Install toothed drive belt and adjust tension.
CAUTION!
After installing new hydraulic valve lifters, DO NOT start the engine for approx. 30 minutes in order to allow the lifters to bleed down.
Otherwise there is danger of the valves being damaged by interference with the pistons.