Passat Wagon L4-2.0L (ABA) (1995)
Drive Belt: Service and Repair
Ribbed Drive Belt, Removing and Installing
Ribbed Drive Belt, Removing And Installing
Note:
^
Before removing the ribbed belt, mark its running direction so that it can be reinstalled the same way.
^
When installing, be sure belt is correctly seated in pulleys.
Special tools, testers and auxiliary items
^
Ribbed belt installation tool 3299
Removing
-
Lift bell tensioner with ribbed belt installation tool 3299 to relieve belt tension.
-
Remove belt from generator pulley.
Note:
^
Belt drive for vehicles without A/C shown. Also - page 73-72.
-
Remove V-belt for power steering pump.
-
Remove ribbed belt.
Installing
-
Install ribbed belt on crankshaft vibration damper.
-
Install V-belt for power steering pump.
Vehicles without A/C:
-
Lift belt tensioner with ribbed belt installation tool 3299 and install ribbed belt.
Vehicles with A/C:
-
Lift belt tensioner with ribbed belt installation tool 3299 and install ribbed belt.