Passat Wagon L4-2.0L (ABA) (1995)
Air Door Cable: Service and Repair
Without Air Conditioning
NOTE:
-
Attach cables to removed controls first and then adjust on heater levers and secure.
-
Ends of sleeves on cables, which are marked with a stripe of paint must be secured to the controls.
-
Position sleeves of cables -7-, -2- and -4- at stops on the controls and then secure. Secure sleeve for cable -3-, see below.
-
With controls installed adjust cables at flap levers.
-
When turning control knobs all flaps must be heard to contact the stops.
1- Main Shut Off Flap Cable
-
From blower rotary control to main shut-off flap
-
Black sleeve, white marking
-
Adjusting cable at main shut off flap, see below.
2- Temperature Flap Cable
-
From temperature rotary control to temperature flap
-
Blue sleeve, white marking
-
Adjusting cable a temperature flap, see below.
3- Footwell/defrost Flap Cable
-
From air distribution rotary control to footwell/defrost flap
-
Black sleeve, blue marking
-
Adjusting cable at footwell/defrost flap, see below.
4- Center Flap Cable
-
From air distribution rotary control to center flap
-
Black sleeve
-
Adjusting cable at center flap, see below.