Passat Wagon L4-2.0L (ABA) (1995)
Evaporator Case: Service and Repair
Evaporator Housing, Assembly
CAUTION: Part numbers are for reference only. Always check with your Parts Department for latest parts information.
To remove evaporator housing for disassembly:
-
Discharge A/C refrigerant system. See: Service and Repair
-
Drain engine coolant.
-
Remove instrument panel and support bracket. See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair
-
Remove heater box/evaporator housing.
Note: Remove heater box/evaporator housing before replacing any parts marked with an *.
1*- Upper evaporator housing
-
seal grooves and contact surfaces with silicone rubber sealant Part No. AKD 476 5 05 or equivalent
2 - Fresh air blower series resistance with fuse (N24)
3*- Seal