volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Headlamp Switch > < Diagram Information and Instructions|Page 4968
Page 1
background image

Headlamp Bulb: Service and Repair

CAUTION:  Before starting work on the electrical system, obtain radio security code (If applicable), turn off ignition and disconnect battery Ground 
(GND) strap.

NOTE:  After any work which could affect the headlight setting, the headlight must be adjusted.

NOTE:  When installing a new bulb do not touch glass.

1- Low beam bulb 12V, 51W
2
- High beam bulb 12V, 55W

To remove - bulbs must be turned to the left

Headlamp Switch > < Diagram Information and Instructions|Page 4968