Passat Wagon L4-2.0L (ABA) (1995)
Fig. 2 - Front Wishbone Mounting, Pressing In
-
Before pressing in coat with acid-free lubricant, e.g. soft soap.
Fig. 3 - Control Arm Rear Mounting, Installation Position
-
One of the embossed arrows points toward the recess in the control arm and the kidney shaped opening (arrow A) faces towards center of vehicle.
Fig. 4 - Control Arm Rear Mounting, Pressing Out And In
NOTE: If bonded rubber bushing is tight because of corrosion, cut rubber out, saw through steel casing and dove bushing out.
Fig. 5 - Supporting Engine/transmission Assembly With Engine Support Tool No. 10-222A And Legs 10-222A/1, Or Equivalent