Passat Wagon L4-2.0L (ABA) (1995)
Note:
When performing repairs to the clutch, make sure that the ball valve (-arrow-) is not damaged.
1
- Circlip
- Mark after removing and install in same position
2
- Thrust plate
- Smooth side facing inner plates
- Thickness with clutches of:
4 inner plates 6.5 mm (0.256 in.)
5 inner plates 4.9 mm (0.193 in.)
3
- Outer plate
4
- Inner plate
5
- Corrugated washer
6
- Circlip
- Removing and installing
- Installation position
7
- Spring supporting plate
- With springs
- Installation position
8
- Spring supporting ring
9
- Piston
- Sealing lips are vulcanized to piston
- Moisten sealing lips with ATF before installing
- Turn piston slightly while installing
10 - Clutch housing with clutch tube