Passat Wagon L4-2.0L Turbo (BPY) (2008)
-
Disconnect door trim wiring harness from door control module.
-
Disengage the cable - 5 - from the interior door mechanism - 6 -.
Installation
‹› Before installing, inspect the securing clips for damage and replace if necessary.
-
Press door trim securing clip inward.
-
Further installation is in reverse order of removal.
Rear Door Trim
Door Trim
Rear Door Trim
‹› Removal and installation is described for the right rear door trim panel. Removal and installation of the left rear door trim panel is performed in
the same manner.
Removal
-
Switch off ignition.
Vehicles with manual window regulators
-
Remove window crank. Refer to => [ Window Crank ] See: Window Crank