Passat Wagon L4-2.0L Turbo (BPY) (2008)
-
Remove Infotainment trim. Refer to => [ Infotainment Trim ] See: Utility Storage Compartment/Service and Repair/Storage Compartments,
Covers and Trim/Infotainment Trim
-
Remove instrument panel center trim. Refer to => [ Center Instrument Panel Trim ] See: Utility Storage Compartment/Service and Repair/Storage
Compartments, Covers and Trim/Center Instrument Panel Trim
-
Remove instrument cluster trim. Refer to => [ Instrument Cluster Trim ] See: Utility Storage Compartment/Service and Repair/Storage
Compartments, Covers and Trim/Instrument Cluster Trim
-
Remove two side screws - 1 - (1.5 Nm).
-
Press rotary light switch in as far as stop, rotate it toward right until it stands vertically, now pull it out and disconnect wiring harness.
-
Remove bolt - 2 - (1.5 Nm).
-
Remove the two bolts - 3 - (1.5 Nm).
-
Remove the two bolts - 4 - (1.5 Nm).
-
Loosen trim from instrument panel.
-
Disconnect wiring harnesses from automatic headlamp range control and parking brake switch.
-
Disconnect wiring harness from ignition lock.
Installation
-
To install, perform the steps used for removal in reverse order.