Passat Wagon L4-2.0L Turbo (BPY) (2008)
-
Apply an even, light bead of sealant (D 154 103 A1) in the clean groove of the guide frame.
‹› Sealant must not be applied too thickly. Wipe off excess sealant if necessary using a lint free cloth.
‹› Placing the guide frame in place and tightening the bolts should occur without interruption, since the sealant begins to harden immediately when
the sealing surfaces come into contact.
‹› Note the expiration date of the sealant.
-
Place the guide frame on the cylinder head.
-
Gently tighten the bolts working from the inside toward the outside in several stages.
-
Then tighten the bolts in the designated sequence to 8 Nm + an additional 90° (1/4) turn.