Passat Wagon L4-2.0L Turbo (BPY) (2008)
Air Door Actuator / Motor: Service and Repair
Fresh/Recirculating Air Door Motor
Fresh/Recirculating Air Door Motor
Removing
‹› Fresh/Recirculating Air Door Motor (V154) can only be removed without difficulty in "fresh air mode stop" and installed only in this position. If
the motor remains in a different position and cannot be moved electrically into the "fresh air mode stop", then it will be difficult to disconnect or
remove.
‹› Position of fresh/recirculating air door must not be changed.
-
Switch the ignition on and wait until the fresh/recirculating air door motor (V154) has reached its end position " fresh air mode".
-
Switch off ignition.
-
Remove glove compartment.
-
Disengage catches - B - and - C - for bracket - A - on intake housing and remove bracket - A -.
-
Disconnect harness connector from the control motor - B -.
-
Remove the fresh/recirculating air door motor (V154) - B in direction of arrow - from intake housing.
‹› Connection between control motor toothed gears and fresh/recirculating air door is designed so that the control motor can only be removed in the "
fresh air mode" position without difficulty (intake opening for recirculating air mode is sealed via the fresh/recirculating air door - A -).
‹› If motor is found in a different position and can no longer be moved, motor cannot be simply pulled off, rather it must be loosened first with great