Passat Wagon L4-2.0L Turbo (BPY) (2008)
‹› To loosen and tighten bolts, hold ribbed belt pulley firmly in place using a standard band wrench (with webbing).
5
Hexagon bolt
‹› Replace
‹› To loosen and tighten bolt, hold ribbed belt pulley firmly in place using a standard band wrench (with webbing).
‹› Clean the thread on the A/C compressor shaft of old locking compound before installing.
‹› Install the bolt with locking compound (D 000 600 A2).
‹› 20 Nm
6
Hex socket head bolt
‹› Quantity: 3
‹› 5 Nm
Remove the ribbed belt pulley
‹› It is not necessary to remove the A/C compressor when replacing the ribbed belt pulley.
‹› To loosen and tighten bolts, hold ribbed belt pulley firmly in place using a standard band wrench (with webbing).
-
Remove the ribbed belt.
-
Remove bolts - arrows -.
-
Remove bolt - 1 -.
-
Remove the circlip - 1 -.