Passat Wagon L4-2.0L Turbo (BPY) (2008)
Compressor Pulley: Service and Repair
Ribbed Belt Pulley, Sanden
Ribbed Belt Pulley, Sanden
‹› It is not necessary to remove the A/C compressor when replacing the ribbed belt pulley.
‹› To loosen and tighten bolts, hold ribbed belt pulley firmly in place using a standard band wrench (with webbing).
‹› Removing ribbed belt.
1
Hex head nut
‹› Replace
‹› To loosen and tighten hex nuts, hold ribbed belt pulley firmly in place using a standard band wrench (with webbing).
‹› Install the hex nuts with locking compound (D 000 600 A2).
‹› 25 Nm
2
Screw
‹› To loosen and tighten hex nuts, hold ribbed belt pulley firmly in place using a standard band wrench (with webbing).
‹› Quantity: 3
‹› 4.5 Nm