Passat Wagon L4-2.0L Turbo (BPY) (2008)
-
Carefully pry adjustment screw - 1 - in - direction of arrow - out of headlamp housing.
-
Disconnect the connector - 2 - on the headlamp range control positioning motor - 1 -.
-
Rotate headlamp beam adjustment motor - 1 - in - direction of arrow - and remove it.
Installing:
Install in reverse order of removal, noting the following:
-
Carefully insert ball head of headlamp beam adjustment motor - 1 - into ball head guide - 2 -, pull reflector toward rear while doing this.