Passat Wagon L4-2.0L Turbo (BPY) (2008)
Installing:
Install in reverse order of removal, noting the following:
‹› When installing covers and headlamp power output stage, ensure seals are seated correctly. It is destroyed by entry of water into headlamp.
‹› After installing a new headlamp power output stage, Headlamp Range/Cornering Lamp Control Module (J745) must be coded. Refer to => [
Headlamp Range/Cornering Lamp Control Module, Coding ] See: Testing and Inspection/Component Tests and General Diagnostics/HID
Headlamps and then basic headlamp setting.
-
Check headlamp for function.
-
Check headlamp adjustment and adjust headlamp if necessary.