Passat Wagon L4-2.0L Turbo (BPY) (2008)
/Page-982007.png)
-
Using a Heat gun set at its lowest setting, heat the shear bolt for approx. 20 to 25 seconds.
-
Using locking pliers, remove the shear bolts - 2 -. Discard used shear bolts.
-
Disconnect the Heated Windshield Control Module (J505) electrical harness connector - 1 -.
-
Remove the locking plate - 1 -.
-
Disconnect the Motronic Engine Control Module (ECM) (J623) electrical harness connectors - 1 -.
