Passat Wagon L4-2.0L Turbo (BPY) (2008)
Checking primary voltage
-
Disconnect the Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC) (G130) electrical harness connector - arrow -.
-
Using a multimeter, check the Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC) (G130) electrical harness connector terminals
3 to 4 for voltage.
-
Crank the engine.
Specified value: 0.4 to 0.5 V
-
Switch the ignition off.