Passat Wagon L4-2.0L Turbo (BPY) (2008)
Intercooler: Service and Repair
Charge Air Cooler
Charge Air Cooler
Removing
-
Remove the noise insulation.
-
Remove the bumper cover.
-
Drain the coolant. Refer to => [ Draining and Filling ] See: Engine, Cooling and Exhaust/Cooling System/Service and Repair/Procedures/Draining
and Filling.
-
Remove the right charge air hose clamps - arrows - and hose.
-
Remove the fan shroud. Refer to => [ Fan Shroud and Fans ] See: Engine, Cooling and Exhaust/Cooling System/Fan Shroud/Service and Repair.
-
Remove the radiator. Refer to => [ Radiator ] See: Engine, Cooling and Exhaust/Cooling System/Radiator/Service and Repair.
-
Remove the air guides on the lock carrier.
-
Remove the charge air cooler bracket bolts - 1 -.
‹› The Air Conditioning (A/C) condenser bolts are difficult to access. With the help of a second technician, lift the charge air cooler out of the lower
mounts. Now the charge air cooler can be tilted back and forth and the bolts are accessible.
-
Remove the A/C condenser pipe bolt - arrow - on the right side of the charge air cooler.