Passat Wagon L4-2.0L Turbo (BPY) (2008)
CAUTION!
Fuel rail is pressurized! Wear protective goggles and protective clothing to prevent injuries and contact with skin. Before loosening the
fuel pressure sensor, place a cloth around the connection point. Then release pressure by carefully loosening.
-
Remove the fuel pressure sensor using (VAS 5301/7).
Installing
Installation is performed in the reverse order of removal, noting the following:
Tightening specification, refer to - item 19 -=> [ ] See: Fuel Delivery and Air Induction/Fuel Rail/Service and Repair/Fuel Rail, Injectors and Pipes
Overview, From 06.06.