Volkswagen Workshop Service and Repair Manuals

Transmission Speed Sensor: Service and Repair
Transmission Input Speed Sensor

Transmission Input Speed Sensor

Removing

-

Remove valve body => [ Valve Body, Removing ] See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Valve Body/Service and
Repair/Valve Body.

-

Remove bolt - 1 - from Transmission Input Speed (RPM) Sensor (G182).

-

Remove sensor from transmission.

Installing

Installation is in reverse order of removal. Pay attention to the following:

-

Press sensor into transmission until stop.

-

Tighten bolt - 1 - of Transmission Input Speed (RPM) Sensor (G182), tightening torque => [ Valve Body Tightening Specifications ] See:
Specifications/Mechanical Specifications/Automatic Transmission/Transaxle/Valve Body, A/T/Valve Body Tightening Specifications - Gears,
Hydraulic Controls. 

-

Install valve body => [ Valve Body, Installing ] See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Valve Body/Service and
Repair/Valve Body.