Passat Wagon L4-2.0L Turbo (BPY) (2008)
-
Install the Motronic Engine Control Module (ECM) (J623) assembly with the retaining screws - 3 -.
-
Tighten the retaining screws - 3 - to 6 Nm.
-
Connect the Motronic Engine Control Module (ECM) (J623) electrical harness connectors - 2 -.
-
Connect the Heated Windshield Control Module (J505) electrical harness connector - 1 -.
-
Install the plenum chamber cover.
-
Install the wiper arms.
-
Reprogram the Motronic Engine Control Module (ECM) (J623).
Motronic Engine Control Module (ECM) (J623) removing and installing with Antitheft bracket.
-
Remove the wiper arms.
-
Remove the plenum chamber cover.
-
Remove the Motronic Engine Control Module (ECM) (J623) retaining screws - 1 -.