Passat Wagon L4-2.0L Turbo (BPY) (2008)
Transmission Speed Sensor: Service and Repair
Transmission Output Speed Sensor
Transmission Output Speed Sensor
Removing
-
Remove valve body => [ Valve Body, Removing ] See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Valve Body/Service and
Repair/Valve Body.
-
Remove bolt - 2 - from Transmission Output Speed (RPM) Sensor (G195).
-
Remove sensor from transmission.
Installing
Installation is in reverse order of removal. Pay attention to the following:
-
Press sensor into transmission until stop.
-
Tighten bolt - 2 - of Transmission Output Speed (RPM) Sensor (G195), tightening torque => [ Valve Body Tightening Specifications ] See:
Specifications/Mechanical Specifications/Automatic Transmission/Transaxle/Valve Body, A/T/Valve Body Tightening Specifications - Gears,
Hydraulic Controls.
-
Install valve body => [ Valve Body, Installing ] See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Valve Body/Service and
Repair/Valve Body.
Torque specifications => [ Valve Body Tightening Specifications ] See: Specifications/Mechanical Specifications/Automatic
Transmission/Transaxle/Valve Body, A/T/Valve Body Tightening Specifications - Gears, Hydraulic Controls