Passat Wagon L4-2.0L Turbo (BPY) (2008)
Transmission Position Switch/Sensor: Adjustments
Multi-Function Transmission Range Switch, Adjusting
Special tools, testers and auxiliary items required
‹› Headlight washer adjustment tool (T10173)
-
Place selector lever in position "N".
-
Do not kink selector lever cable.
Adjustment Prerequisites
‹› Selector lever cable is removed from lever/shift rod
‹› Shift rod is in position "N"
‹› Mounting bolts of Multi-Function Transmission Range (TR) Switch (F125) are loosened
‹› Lever/shift rod is removed
-
Attach adjustment tool onto shift rod - 2 - and turn multi-function switch - 1 - until adjustment tool engages on tab of connector at multi-function
switch.
-
Fasten adjustment tool to shift rod - 2 - using bolt - 3 -.
-
Tighten bolts - arrows - to 6 Nm.
-
Remove adjustment tool.
-
Further installation is performed in the reverse sequence => [ Multi-Function Transmission Range Switch, Installing ] See: Service and
Repair/Multi-Function Transmission Range Switch, Installing.