Passat Wagon L4-2.0L Turbo (BPY) (2008)
Shifter A/T: Procedures
Selector Mechanism Overview
6 SPD. A/T 09G FWD
Selector Mechanism Overview
1- Shift cover with knob
2- Shift mechanism with selector lever
3- Bolt with spring
^
3 Nm
4- Pin
^
Do not grease
5- Securing plate
^
Always replace after removal
6- Nut
^
9 Nm
^
Quantity: 4
7- Shift housing
^
With seal
8- Selector lever cable
^
Do not grease cable.
9- Hex bolt with washer
^
8 Nm
^
Quantity: 4
Selector Mechanism, Checking
6 SPD. A/T 09G FWD
Selector Mechanism, Checking
Starter must not be able to be operated in selector lever positions "R", "D" and "S".
For speeds exceeding 5 km/h and shifting into selector lever position "N", the shift lock solenoid must not engage to lock the selector lever. Selector
lever can be shifted into driving gear.
For speeds below 5 km/h (almost standstill) and shifting into selector lever position "N". the shift lock solenoid must only engage after approximately