Passat Wagon L4-2.0L Turbo (BPY) (2008)
‹› Tighten oil pan bolts in several stages in a diagonal sequence
‹› Torque specification => [ Valve Body Tightening Specifications ] See: Specifications/Valve Body Tightening Specifications - Gears,
Hydraulic Controls
6
Gasket
‹› With spacers (quantity: 8)
‹› Check before installing
‹› Replace brittle, cracked or deformed seals
7
Magnet
‹› Qty. 2, in depressions of oil pan
‹› Clean before installing oil pan
8
Bolt
‹› For mounting valve body on transmission
‹› Qty. 12, various lengths => [ Bolt lengths and locations on the valve body ] See: Valve Body
‹› Always replace bolts
‹› Torque specification => [ Valve Body Tightening Specifications ] See: Specifications/Valve Body Tightening Specifications - Gears,
Hydraulic Controls
9
Bolt
‹› Quantity: 3
‹› For securing oil strainer to valve body
‹› Torque specification => [ Valve Body Tightening Specifications ] See: Specifications/Valve Body Tightening Specifications - Gears,
Hydraulic Controls
10
Oil Strainer
‹› Removing and installing => [ Oil Strainer ] See: Fluid Filter - A/T/Service and Repair
11
Valve Body
‹› Removing => [ Valve Body, Removing ] See: Valve Body
‹› Installing => [ Valve Body, Installing ] See: Valve Body
12
Bolt
‹› Torque specification => [ Valve Body Tightening Specifications ] See: Specifications/Valve Body Tightening Specifications - Gears,
Hydraulic Controls
13
Bolt
‹› Torque specification => [ Valve Body Tightening Specifications ] See: Specifications/Valve Body Tightening Specifications - Gears,
Hydraulic Controls
14
Transmission Input Speed (RPM) Sensor (G182)
‹› Removing and installing => [ Transmission Input Speed Sensor ] See: Sensors and Switches - A/T/Transmission Speed Sensor/Service and
Repair/Transmission Input Speed Sensor
15
Bolt