Passat Wagon L4-2.0L Turbo (BPY) (2008)
Wiper Arm: Adjustments
Windshield Wiper Blades, Adjusting Park Position
Windshield Wiper Blades, Adjusting Park Position
Special tools, testers and auxiliary items required
‹› Torque Wrench (V.A.G 1331)
-
Deactivate APP function, refer to => [ Wiper Motor Alternating Park Position Function, Deactivating ] See: Wiper Motor/Testing and Inspection.
-
Actuate wiper motor into the end position and then switch off ignition.
-
Now set the park positions of the windshield wiper blades.
Driver Side:
The gap dimension - A - between the center of the wiper blade and lower edge of the windshield must be 39 mm.
-
If necessary, set park position of windshield wiper blades by offsetting wiper arms.
Wiper arms, removing, refer to => [ Wiper Arms ] See: Service and Repair/Removal and Replacement/Wiper Arms.
-
Tighten the bolt to the specification shown in => [ Specifications ] See: Specifications/Specifications.
Passenger Side:
The distance - B - between the wiper blade and the upper edge of the plenum chamber cover must be 14 mm.