Passat Wagon L4-2.0L Turbo (BPY) (2008)
/Page-3022002.png)
-
Place the retaining plate - 1 - on and screw in the mounting bolts - arrows -.
-
Tighten the bolts - arrows - to the specification shown in => [ Specifications ] See: Specifications/Specifications.
-
Place motor crank - 2 - onto wiper motor shaft.
Different versions of the retaining plate from two manufacturers are installed.
-
The manufacturer of the version installed can be determined by the stamp on the retaining plate.
-
Adjust the distance - a - between the fixed stop point on retaining plate - 3 - and motor crank - 2 - to the following dimension:
