Passat Wagon L4-2.0L Turbo (CCTA) (2009)
Rear Vision Camera: Service and Repair
Rear View Camera, Removing Handle From Rear Lid
Parking Aids
Rear View Camera, Removing Handle From Rear Lid
Special tools, testers and auxiliary items required
‹› Torque Wrench (V.A.G 1783)
The rear view camera is installed in the handle button in the rear lid. To remove the rear view camera, the handle must be removed from the rear lid
first. Then the rear view camera can be removed from the handle.
Removing:
-
Switch off ignition, switch off all electrical consumers and remove ignition key.
Remove the rear lid trim.
-
Open the wiring bracket for the rear view camera wiring harness in the connector area and remove both wires.
-
Release and disconnect both connectors - arrows -.
-
Remove both mounting nuts - arrows -.
-
Disengage and disconnect harness connector - arrow -.