volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Warning Triangle Bracket|Page 6838 > < Trunk / Liftgate Hinge|Service and Repair|Page 6833
Page 1
background image

Trunk / Liftgate Interior Trim Panel: Service and Repair
Warning Triangle Bracket

Rear Lid Trim

Warning Triangle Bracket

Removal

-

Open the warning triangle bracket.

‹› The opening angle of the warning triangle bracket must be approx. 45° for the following removal procedure.

-

Press warning triangle bracket - 1 - with the (3409) inward on the right side and release it from the mounting pin.

-

Remove warning triangle bracket - 1 - from the left mounting pin.

Installation

-

Slide warning triangle bracket - 1 - at a 45° angle onto the left mounting pin.

Warning Triangle Bracket|Page 6838 > < Trunk / Liftgate Hinge|Service and Repair|Page 6833